VPG VanWeigh - How to Configure the Alarms

To Next Page

To Previous Page

How to conﬁgure the alarms

The alarms are congured in the the vehicle conguration menu. From the home page, go to:

Conguration > Vehicle Conguration.

Obtain the maximum allowable gross and axle weights from the vehicle data plate

1. Tap Alarms to open the jbox alarms cong menu:

2. Tap the Gross Alarm value to set the value that will trigger the alarm when the total weight on

the vehicle exceeds the maximum allowable weight

3. Tap the Enable value to enable or disable the gross alarm

4. Tap the Save icon

5. Swipe up and tap Axles to open the axle alarm cong menu:

Juncon Box

Gross Alarm

Enable

1 - 1

3500 kg

Enabled

JBox Alarms Cong

1/2

Juncon Box

Axles

1 - 1

JBox Alarms Cong

2/2

Axle Number

Alarm Weight

Enable

1 - 2

1800 kg

Enabled

Axle Alarms Cong

1/1

VanWeigh