23
Sensor installation positions
The rst step to sensor installation is to select the appropriate position to install each type of
sensor on the vehicle.
Each sensor has a serial number. Make a note of the serial number of each sensor which
you install, its position number and where it is installed on the vehicle. It is recommended
that you use the system conguration table to record this information and refer to it when
you are conguring the system. See “System conguration table” on page 68
Serial: xxxx
Position: 2
Front right axle
Serial: xxxx
Position 1
Front left axle
Serial: xxxx
Position 4
Rear right axle
Serial: xxxx
Position 3
Rear left axle
VanWeigh
®
VanWeigh
®
To Next Page
Loading...