49
Weigh pads:
1. Use one pair of weigh pads per axle.
If possible, weigh all axle
at the same time. If not,
use levelling mats to
maintain the overall level
of any axles which are
not being weighed.
2. Add together the weight
measurements for both
sides of the axle to
calculate the current
weight of the axle.
Weigh bridge:
The weigh bridge must have a level approach.
1. Drive the front axle of the vehicle on to the weighbridge
2. Take the weight measurement
3. Drive the next axle on to the weigh bridge
4. Take the weight measurement
VanWeigh
®
VanWeigh
®
To Next Page
Loading...