VTI Instruments EX1000A - Page 42

VTI Instruments Corp.
42 EX10xxA Preparation for Use
FIGURE 2-3-2: RX10XX CHANNEL SCREW TERMINAL PLATE VIEW
12) Unscrew the captive screws to inserts the thermocouple wires/ U - Lugs into it.
13) Fix the thermocouple 'U' Lugs into screw terminals. Each channel has S,+ & - signals screws (‘S’
for Shield, ‘+’ for Positive input, ‘-‘ for Negative input). Refer the below channel layout diagram of
screw terminals.