SmartBoard
4
Operation and Functions
33
Information Description Note
Display time The length of time that the
start screen is displayed after
the SmartBoard has been
switched on
X … XX seconds
Screen saver Activation/Deactivation of the
screen saver
Idle time Delay time after which the
screen saver becomes active
1 … 99 seconds
Event LED
The key <Arrow right> is used to switch between the different options. Press <OK>
to apply the changes.
Information Description Note
Function Activation/Deactivation of the
warning LED
Stand-by time Length of time for which the
warning LED flashes after the
message has occurred
Only available if the warning
LED function is switched on.
X … XXX hours
Start menu Definition of the menu in the
event that a message occurs
after the SmartBoard is
switched on
Start menu or freely defin-
able menu
Tyre size for internal odometer (tyres)
The key <Arrow right> is used to switch between the different options. Press <OK>
to apply the changes.
The driven distance is counted and displayed by the SmartBoard. This information
can also be retrieved with the "Auto Config" function from the Trailer EBS Modula-
tor (see chapter 4.4.14.4 "Auto Config", page 36).
Information Description Note
Number of pole
wheel teeth
Number of pole wheel teeth.
Tire circumference Setting the tyre data. Adjustable in 50 mm-steps
(or steps of 2 inches).
Start menu
The key <Arrow right> is used to switch between the different options. Press <OK>
to activate.
The currently selected menu is marked by a ●.
To Next Page
Loading...
