BA 5001-6001 US – Edition 1.2 * * 6001b540.fm 5-37
Maintenance
Lubricate the following assemblies/components – see Lubrication plan 5001 on page 5-38:
• Steering ram ●●
• Tilt ram – offset ram ●●
• Articulated joint ●●
1. Drain engine oil the first time after 50 s/h, then every 250 s/h
2. Replace the engine oil filter the first time after 50 s/h, then every 250 s/h
3. Replace the fuel filter the first time after 50 s/h, then every 250 s/h
4. Replace the hydraulic oil filter insert the first time after 50 s/h, then every 500 s/h
5. Clean the water ducts every other 1000 s/h servicing
6. Check the injection nozzles and the valves every other 1500 s/h servicing
7. Check the first time at 50 s/h, then every 500 s/h
5.14 Maintenance plan (overview)
Work description
For service and maintenance work on the attachment, please refer to the operation and maintenance manual of the
attachment manufacturer as well.
Maintenance plan/service hours (s/h)
Maintenance work
(once a day)
Every 50 s/h
Every 500 s/h
Once a year or after 1000 s/h
After 1500 s/h
Customer
To Next Page
Loading...
