WM 130/170/270 Safety Information
wc_si000090gb.fm 17
2.2 Operating Safety
Familiarity and proper training are required for the safe operation of
equipment! Equipment operated improperly or by untrained personnel
can be dangerous! Read the operating instructions contained in this
manual and familiarize yourself with the location and proper use of all
controls. Inexperienced operators should receive instruction from
someone familiar with the equipment before being allowed to operate
the machine.
2.2.1 NEVER allow anyone to operate this equipment without proper
training. People operating this equipment must be familiar with the
risks and hazards associated with it.
2.2.2 NEVER touch the engine or muffler while the engine is on or
immediately after it has been turned off. These areas get hot and may
cause burns.
2.2.3 NEVER use accessories or attachments that are not recommended by
Wacker. Damage to equipment and injury to the user may result.
2.2.4 NEVER leave machine running unattended.
2.2.5 NEVER operate the machine in snow, rain, or standing water.
2.2.6 ALWAYS be sure operator is familiar with proper safety precautions
and operation techniques before using machine.
2.2.7 ALWAYS wear protective clothing appropriate to the job site when
operating equipment.
2.2.8 ALWAYS wear hearing protection when operating equipment.
2.2.9 ALWAYS close fuel valve on engines equipped with one when
machine is not being operated.
2.2.10 ALWAYS store the equipment properly when it is not being used.
Equipment should be stored in a clean, dry location out of the reach of
children.
2.2.11 ALWAYS operate machine with all safety devices and guards in place
and in working order. DO NOT modify or defeat safety devices. DO
NOT operate machine if any safety devices or guards are missing or
inoperative.
2.2.12 ALWAYS read, understand, and follow procedures in the Operator’s
Manual before attempting to operate the equipment.
WARNING
To Next Page
Loading...
Need help?
General
