Wacker Neuson WM 170 Repair Manual

WM 130/170/270 Repair Reassembly Procedures
wc_tx000379gb.fm 69
9.21 Governor Lever
See Graphic: wc_gr001815
9.21.1 Slide the governor rod through the rod spring (a). Connect the
governor rod/spring assembly (b) to the throttle lever of the carburetor.
9.21.2 Attach the governor rod/spring assembly to the governor lever (c), then
mount the governor lever to the governor shaft. Do not adjust the bolt
on the governor yet.
9.21.3 Connect the governor lever and the speed control lever with the
governor spring.
Note: Mount the air cleaner base before adjusting governor.
Reference: Longer side (a
1
); shorter side (a
2
).

Wacker Neuson WM 170 Specifications

General

Brand	Wacker Neuson
Model	WM 170
Category	Engine
Language	English