10
GM 4700AC
OPERATING MANUAL
VERSION 06/2014 ORDER NUMBER DOC2311730
Note:
Please contact your local WAGNER dealer and the lacquer manufacturer if you encounter
application problems.
2.5 PROCESSIBLE WORKING MATERIALS
Top-coat paints, primer paints, corrosion protection, textured lacquers, lyes, staining
solvents, clear lacquers, separating agents, etc. with a solvent or water base. If you want
to spray working materials other than the aforementioned, please contact a Wagner
representative.
WARNING
Hot coating products!
Burns
Wear antistatic protective gloves.
When operating the device with a coating product with a
temperature of > 43 °C;109.4 °F, identify the device with a
warning label that says "Warning - hot surface".
2.6 REASONABLY FORESEEABLE MISUSE
The forms of misuse listed below may result in physical injury or property damage:
Unauthorized conversions or modi cations to the system;
Processing dry or similar coating products, e.g. powder;
Using defective components, spare parts or accessories other than those described in
the "Accessories" chapter of this operating manual;
Continuing work with a defective or kinked product hose;
Working with incorrectly set values;
Processing food.
To Next Page
Loading...
Need help?
General
