WAGNER GM 4700AC - 2 CORRECT USE; 2.3 Use in Potentially Explosive Areas

9
GM 4700AC
OPERATING MANUAL
VERSION 06/2014 ORDER NUMBER DOC2311730
2 CORRECT USE
2.1 DEVICE TYPE
AirCoat manual gun for manually coating work pieces.
2.2 TYPE OF USE
The gun is suitable for atomizing liquid products, particularly coating products, using the
AirCoat process.
2.4 SAFETY PARAMETERS
2.3 USE IN POTENTIALLY EXPLOSIVE AREAS
The device is suitable for use in potentially explosive areas as de ned in the 94/9/EC (ATEX)
Directive, (see Explosion protection marking Chapter 3.1).
WAGNER shall not accept any liability for any damage resulting from incorrect use.
Only use the device to work with the products recommended by WAGNER.
Only operate the device as a whole.
Do not deactivate safety  xtures.
Use only WAGNER original spare parts and accessories.
The device may only be operated under the following conditions:
The operating sta must be trained based on this operating manual.
The safety regulations listed in this operating manual must be observed.
The operating, maintenance and repair information in this operating manual must be
observed.
The statutory requirements and accident prevention regulation standards in the
country of use must be observed.