WAGO I/O System 750 Series User Manual

DeviceNet • 79
Configuration / Parametering with the Object Model
WAGO-I/O-SYSTEM 750
DeviceNet
4.6 Configuration / Parametering with the Object Model
4.6.1 EDS Files
In DeviceNet, the capacity characteristics of the devices are documented by
the manufacturers in the form of an EDS file (Electronic Data Sheet) and
made available to the user.
Architecture, contents and coding of the EDS files are standardized which
permits design and configuration with devices of different manufacturers.
The EDS file is read by the configuration software and corresponding settings
transmitted. For required entries and handling steps for this purpose, please re-
fer to the software user manuals.
Further information
ODVA informs about the EDS files of all listed manufacturers.
http://www.odva.org
EDS and symbol files to configure the I/O modules are available under the
order numberr 750-912 on a floppy disk or on the WAGO INTERNET home-
page.
http://www.wago.com

WAGO I/O System 750 Series Specifications

General

Brand	WAGO
Model	I/O System 750 Series
Category	I/O Systems
Language	English