WAGO I/O System 750 Series User Manual

82 • DeviceNet
Configuration / Parametering with the Object Model
WAGO-I/O-SYSTEM 750
DeviceNet
4.6.2.1.3 Message Router (0x02):
no attribute, no services
4.6.2.1.4 DeviceNet Object (0x03):
Instance 0:
Attribute
ID
Used in
buscoupler
Access
rule
Name Data type Description Default
Value
1 required get Revision UINT Revision of the Identity Object,
Range 1-65535, class definition
upon which the implementation
is based.
0x02
Instance 1:
Attribute
ID
Used in
buscoupler
Access
rule
Name Data type Description Default
Value
1 Optional get/set MAC ID USINT Node address 0 - 63
2 Optional get Baud Rate USINT Baud rate 0 - 2
3 Optional get/set BOI BOOL Bus-off Interrupt 0/1
4 Optional get/set Bus-Off
Counter
USINT Number of times CAN went to
the bus-off state
0 - 255
5 Optional get Allocation
Informa-
tion
Allocation
Choice
Byte
Master`s
ID
Struct of:
BYTE,
USINT
s. MAC ID of Master (from
Allocate)
0 - 63, 255
Services:
Service Code Service Name Description
0x0E Get_Attribute_Single Used to read a DeviceNet Object attribute value
0x10 Set_Attribute_Single Used to modify a DeviceNet object attribute value
0x4B Allocate_Master/Slave_Connection Requests the use of the predefined Master/Slave
connection
0x4C Release_Group_2_Identifier_Set Indicates that the specified connections within the
predefined Master/Slave connection set are no
longer desired. These connections are to be released
(deleted)

WAGO I/O System 750 Series Specifications

General

Brand	WAGO
Model	I/O System 750 Series
Category	I/O Systems
Language	English