2787-2146 (/0000-00x0) Configuration
Product manual | Version: 1.2.2 47
Power Supply Pro 2
Section Parameters Description
Digital output on If this checkbox is selected, the digital output is
switched on.
Inversion DO If this checkbox is selected, the digital output is in-
verted.
Warning thresholds Overload limit active If this checkbox is selected, a warning is triggered if
the overload warning threshold is exceeded.
Warning threshold Here you can enter the value for current (unit: mA) at
or above which a warning message is generated.
Operating hour counter warn-
ing limit
You can enter after how many operating hours (unit: h)
after which a warning message is generated.
1)
These parameters are not mutually exclusive and can also be selected simultaneously.
To Next Page
Loading...
