15
pickling
brush
12V
PWR: HIGH PUMP: 1
pickling
PAD
28V
PWR: HIGH PUMP: 1
POLISHING PAD
18V
PWR: HIGH PUMP: 1
POLISHING brush
12V
PWR: HIGH PUMP: 1
Black MARKING
12V
PWR: HIGH PUMP: 1
STAINLESS STEEL
ETCHING
12V
PWR: HIGH PUMP: 1
SURFOX 306
USER MANUAL
3.3. Menu structure
The display lights up when the main switch of the device is
brought to position "I"; this switch, colored green, is located
in the front of the device (see chapter 2.4).
During startup, the WALTER logo and a screen with the
rmware information are briey displayed on the screen.
The unit then moves on to the PICKLING BRUSH program.
To change the operating mode, press the MODE button.
with a further press of the MODE button
the menu starts over again
Regardless of the program selected, the – and + keys
can be used to increase or decrease the working voltage
(in 1-volt increments).
The default voltage level in the various operating
modes is that recommended by the manufacturer.
To Next Page
Loading...
