Walter SURFOX 306 - Electrical Installation

27
A
B
SURFOX 306
USER MANUAL
5.4. Electrical installation
• Prepare the wand by installing the most suitable accessory
for the type of work you want to undertake (see chapter 4).
• Connect the ground cable connector (A) to the red socket
on the front panel of the unit.
• Use the crocodile terminal of the ground cable (B) to grip
the piece of stainless steel to be treated.
• Connect the device power cord to a suitable socket.
Make sure you have read and checked all the precautionary notes in chapter 5.1.