19
1
2
3
4
SURFOX 306
USER MANUAL
Always use suitable protective gloves when mounting/removing wand accessories in order to:
• Reduce the risk of direct contact between skin and acid solutions.
• Obtain a certain level of protection from burns if the inserts are still too hot.
4. MOUNTING ACCESSORIES ON THE WAND
During the installation of inserts, pads and brushes, the device must be switched o:
• Switch the main switch to the "O" position.
• Disconnect the device from the mains.
4.1. Overview of accessories
1 54-B 149 Brush adaptor included p. 20
2 54-B 606 Round shape brush (Ø12) included p. 21
3 54-B 155 Triangular shape brush optional p. 21
4 54-B 601 Round shape brush (Ø10) optional p. 21
BRUSHES
For its normal operation, the device requires the use of particular acid solutions that can be dangerous (read
chapter 1 carefully).
When replacing an accessory on the wand, be very careful of any electrolyte residues remaining on the pad
or brush.
To Next Page
Loading...
