WANHAO MARK II Duplicator 6 Plus - A2. Specifications of the WANHAO D6 Plus

A2. Specication of the D6 Plus Welcome to the D6 Plus
5
Primary Attributes
of the Technology
FDM Type Printer, Fully assembled. Entry Level
Desktop Home Printer.
Software CURA, Repetier Host, Simplify 3D, & Others
Extruder System MK11 Extruder with Full Metal Hot End
Material Support PLA, PVA, PC, PETG, ABS, Most Other Filaments
Bed Leveling
Auto bed leveling,Manual leveling
Max Printable Area 200*200*180mm
Filament Diameter/Light 1.75mm
Max Printing Speed 70mm/S
Case Material Steel Case
With Enclosure? Optional
Extruder Quantity 1
Accuracy X 0.0125mm
Y 0.0125mm
Z 0.005mm
Material Cost USD12-34
Net Weight(kg) 20kg
Gross Weight(kg) 22kg
Packing Size(cm) 46x46x55cm
Plateform Holder Steel frame holder
Layer Thickness 100 micron- 400 micron
Rail Locking System Steel Locking Frame
Print Bed Type Aluminum Plate, Heated
Resume Printing Can Resume Printing After Power failture
LCD Display English/Chinese or Customize Any Language
Power Supply Internal 110V or 250V(optional), 50/60Hz, 4.0A
(Input), Uses Standard IEC Cable
Typical Application •A perfect printer for educators who intend to
use the printers in technical education.
•Great printer for DIY Hobbyist.
Technical Specications