IntelliStart fluidics system operation 1-19
To program the MS method:
1. In the MassLynx window, click MS Method.
2. In the MS Methods window, click Options > Method Events.
3. In the Method events dialog box, select the appropriate flow state, as
shown in the following table.
Tip: At instrument power-up, the LC state is waste.
See also: MassLynx online Help topic “Advanced Methods and Events”.
Flow states :
State LC Syringe
LC TQ probe Waste
Combined TQ probe TQ probe
Infusion Waste TQ Probe
Waste Waste Waste
No change No change No change
To Next Page
Loading...
