Waters TQ Detector Quick Start Guide

2-10 Preparing the Waters TQ Detector for Operation
Installing the reservoir bottles
Required materials
Chemical-resistant, powder-free gloves
To install the reservoir bottles:
1. Remove the reservoir bottle caps.
2. Screw the reservoir bottles onto the TQ Detector as shown below.
Warning: The reservoir bottles can be contaminated with
biohazardous and/or toxic materials. Always wear
chemical-resistant, powder-free gloves while performing this
procedure.
TP02630

Waters TQ Detector Specifications

General

Brand	Waters
Model	TQ Detector
Category	Measuring Instruments
Language	English