Waters TQ Detector Quick Start Guide

Shutting down the TQ Detector 2-17
Emergency TQ Detector shutdown
To shut down the TQ Detector in an emergency:
1. Operate the power button on the front of the TQ Detector.
2. Disconnect the power cable from the back of the TQ Detector.
Warning: The TQ Detector’s power switch does not isolate the
instrument from the main power supply. To isolate the instrument,
you must disconnect the power cable from the back of the instrument.
Caution: Data can be lost during an emergency shutdown.

Waters TQ Detector Specifications

General

Brand	Waters
Model	TQ Detector
Category	Measuring Instruments
Language	English