vii
Operating this device
When operating this device, follow standard quality control procedures and
the guidelines presented in this section.
Symbols
Intended use
The Waters Tandem Quadrupole (TQ) Detector is intended to be used as a
research tool to deliver authenticated mass measurement in both MS and
MS/MS modes.
The Waters TQ Detector can be used for general In Vitro Diagnostic
applications, only by professionally trained and qualified laboratory
personnel.
Symbol Definition
Authorized Representative of the
European Community
The CE symbol serves as
confirmation of the conformity of a
product with all European
Community directives applicable to
that product.
For in vitro diagnostic use.
The Waters TQ Detector is CE-marked according to the
European Union In Vitro Diagnostic Device Directive 98/79/EC.
EC REP
IVD
To Next Page
Loading...
