Waters TQ Detector - Safety and Handling During Maintenance

4-10 Operating the Waters TQ Detector
Instrument Setup Parameters dialog box Method Developer tab:
In this case, Sulfadimethoxine.exp is the method file created.
The Validation pane selections save optimization data for validation
purposes and creates an autotune report file (Sulfadimethoxine.xml).
11. Click Start .
Result: A message appears reminding you to ensure that the sample
solutions, sample tune parameters and LC flow are set correctly.
12. Click OK.
Result: Method development starts. The ACQUITY UPLC Console
displays the progress of the method development. When the method
development is complete, the method is written to the
Sulfadimethoxine.exp file.
The Validation pane selection saves optimization data for validation
purposes, and creates an autotune report file (Sulfadimethoxine.xml).
A green check mark indicates a successful run; a red cross indicates a
failure.