Watlow PM LEGACY PM3 - Page 71

Watlow PM LEGACY™ Limit Controller • 71 • Chapter 6 Setup Page
Setup Page
Display
Parameter Name
Description
Range Default
Modbus
Relative
Address
CIP -
Class
In-
stance
Attri-
bute
hex
(dec)
Pro-
fibus
Index
Pa-
rame-
ter
ID
Data
Type
and
Ac-
cess
**
iP.F3
ip.F3
Communications (2)
IP Fixed Address Part
3
Set the IP address
of this module. Each
device on the network
must have a unique
address.
0 to 255 1 - - - - - - - - - - - - 17016 - - - -
iP.F4
ip.F4
Communications (2)
IP Fixed Address Part
4
Set the IP address
of this module. Each
device on the network
must have a unique
address.
0 to 255 1 - - - - - - - - - - - - 17017 - - - -
iP.S1
ip.S1
Communications (2)
IP Fixed Subnet Part
1
Set the IP subnet
mask for this module.
0 to 255 255 - - - - - - - - - - - - 17020 - - - -
iP.S2
ip.S2
Communications (2)
IP Fixed Subnet Part
2
Set the IP subnet
mask for this module.
0 to 255 255 - - - - - - - - - - - - 17021 - - - -
iP.S3
ip.S3
Communications (2)
IP Fixed Subnet Part
3
Set the IP subnet
mask for this module.
0 to 255 0 - - - - - - - - - - - - 17022 - - - -
iP.S4
ip.S4
Communications (2)
IP Fixed Subnet Part
4
Set the IP subnet
mask for this module.
0 to 255 0 - - - - - - - - - - - - 17023 - - - -
** R: Read, W: Write, E: EEPROM, S: User Set