Watts Powers IntelliStation User Manual

58
Troubleshooting
5. Unlock the control (see “Unlock the System” of this Manual for more detail) and then select the
to navigate to the “Toolbox” menu shown below.
9. If problem persists after conducting the above outlined problem solving procedures contact Powers
Technical Support at 800-669-5430 or info@PowersControls.com.
!
Always use proper precautions when accessing circuit breaker box.
6. On the “Toolbox” menu use the icon to highlight “Reset” as shown above then press .
This will access the “Reset” menu shown below.
7. Press the and then and the control will reset and begin a start up sequence.
8. Reset the control by opening and closing the circuit breaker switch and wait 60 seconds to resume
normal operation.
OK
Toolbox
?
Reset
No
Yes
No
Load Defaults
No
Flow Units
gpm
Pressure Units
psi
Temperature Units
°F
Energy Units
MBtu
Backlight
100 %
Reset
Back Up Down
Toolbox
Enter
?

Watts Powers IntelliStation Specifications

General

Brand	Watts
Model	Powers IntelliStation
Category	Plumbing Product
Language	English