Installation and Connection
3
3-12 | CFW-11
Frame Sizes D and E:
It is necessary to remove the keypad (HMI) and the control rack cover in order to get access to the control
terminal strip (see Figure 3.10 on page 3-12). In order to get access to the power terminal strip, remove the
bottom front cover (see Figure 3.11 on page 3-12).
1 2 3
Figure 3.10 - HMI and control rack cover removal - frame sizes D and E
1 2
Figure 3.11 - Bottom front cover removal - frame sizes D and E
To Next Page
Loading...
