Manual R06-2016 105 / 172
ROTARY INDEXING TABLE CONTROLLER
EF2...B
OPERATION / DESCRIPTION OF WEISS SOFTWARE | 8.3 Machine configuration
➱ Individual assignments cannot be deleted or changed.
➱ The display of control functions is informative.
4. Click the Next button.
➱ After the Next button has been clicked, a comment box appears.
For a description of the comment box, refer to chapter 8.3.5.3 „Comment regarding I/O configuration data file“
on page 106.
By clicking on the Next button in the comment box, the I/O configuration is completed and the window
for adjusting the system time is opened.
5. Adjust the system time (see chapter „Adjust system time“ on page 93).
6. Restart the controller (see chapter „Restart“ on page 94).
To Next Page
Loading...
Need help?
General
