Weldex WDP-4602MXV - Page 41

Configuration
- EVENT
41
This document contains confidential and proprietary information of Weldex Corporation.
WEB Viewer
Item Description
Use
Enable/Disable motion detection.
Sensitivity
Select motion detection sensitivity.
Selectable between 1~10.
On M/D
Behavior
Configure motion detection behavior.
Upload JPEG image to FTP server
Upload JPEG images to the FTP server for the selected duration.
Selectable values: OFF, 10s, 30s, 1m, 5m, 10m.
Send email with JPEG image
Send JPEG images to the SMTP server for the selected duration.
Selectable values: OFF, 10s, 30s, 1m, 5m, 10m.
Alarm output
Outputs alarm signal for the selected duration.
Selectable values: OFF, 10s, 30s, 1m, 5m, 10m.
Play
alarm sound
Outputs alarm sound for the selected duration.
Selectable values: OFF, 10s, 30s, 1m, 5m, 10m.
MOTION DETECTION > BEHAVIOR SETTING
Note
Streaming 2 should be enabled for the motion detection setup page image to display properly:
‘SETUP > AUDIO&VIDEO > VIDEO PROFILE’
In Internet Explorer web browser motion detection setup page image is 1 frame per second.
In Safari, Chrome web browsers, the motion detection setup page image frame rate is normal.