Western Digital Ultrastar Data60 - Revision History

User Guide Revision History
Revision History
Date Revision Comment
November 2017 1.0 Initial release
November 2017 1.1
• The crossbar on the CMA was changed. See CMA (page 49).
• Removed Lowline power specs from Power Requirements (page
19).
• Changed required rack depth, see Mechanical Specifications (page
5).
• Changed typical power consumption, see Electrical Specifications
(page 4).
• Updated LED Flash Patterns, see LEDs (page 9).
December 2017 1.2
• Added active cable support
• Added firmware upgrade section. See Firmware Upgrade (page
161).
• Updated the Non-Op altitude specification. See Environmental
Specifications (page 4).
January 2018 1.2.1 Updated the product name
January 2018 1.3
• Updated information on the 2.5" drive carrier option. See 2.5in SSD
Assembly (page 55).
• Added torque requirements for all screws used in the enclosure.
• Updated the IOM replacement section to account for the possibility
of a firmware mismatch. See IOM Replacement (page 59).
• Updated the drive assembly installation instructions to clarify
the orientation of the drive assemblies. 3.5in HDD Assembly
Replacement (page 71).
April 2018 1.4
• Updated Compatible Drives List. See List of Compatible Drives
(page 22).
• Updated the Rack Requirements. See Ultrastar Data60 Rack
Requirements (page 15).
• Updated the Firmware Upgrades. See: Firmware Upgrade (page
161)
May 2018 1.5 Added the Part Replacement Service Window. See: Part Replacement
Service Window (page 59)
June 2018 1.6
• Updated Compatible Drives List. See List of Compatible Drives
(page 22)
• Updated the Firmware Upgrade section. See Firmware Upgrade
(page 161)
vi