Western Digital Ultrastar Data60 - Page 8

User Guide Revision History
Date Revision Comment
• Updated the Firmware Download section. See Downloading
Firmware from the Support Portal (page 161)
• Updated the System Architecture Overview section. See System
Architecture Overview (page 2)
• Updated the Daisy Chaining section. See Daisy Chaining (page
220)
• Added the Rear Cover Alignment Bracket Description. See Rear
Cover Alignment Bracket (page 48)
November 2018 1.7
• Updated the images in the Daisy Chaining section. See Daisy
Chaining (page 220)
• Updated List of CRUs. See List of Customer Replaceable Units
(CRUs) (page 7)
• Updated Compatible Drives List. See List of Compatible Drives
(page 22)
• Updated the Host Connectivity section. See: SAS Cabling (page
20)
May 2019 1.8
• Changed senddiag commands from images to codeblocks. See
sg_senddiag Command (page 188).
• Updated daisy-chaining tables to match diagrams. See Two Host
Cable Configurations (page 227).
• Corrected OOBM zoning configuration instructions. See Predefined
Zoning Configurations (page 180).
• Added Configuring OOBM Network Settings Using SES (page
176).
May 2019 1.9
• Corrected the system architecture overview. See System
Architecture Overview (page 2).
• Corrected explanation of SATA configuration in Firmware Upgrade
(page 161) section.
June 2019 1.10
• Updated the Host Connectivity section. See: SAS Cabling (page
20)
• Added Windows syntax examples and reorganized the Upgrading
Firmware with OOBM section
June 2019 1.11 Updated the Host Connectivity section. See: SAS Cabling (page 20)
July 2019 1.12
Moved the following topics to the Ultrastar Data60 Description (page
2) section:
• Ultrastar Data60 Rack Requirements (page 15)
• Power Requirements (page 19)
• ESD (page 19)
• Enclosure Cooling (page 19)
vii