Windhager LogWIN Klassik - Installing the Insulation

18
2. For the Installer
2.3.10 Installing the insulation
only for LogWIN Klassik pellet ready:
– Remove cut-out for heating-surface cleaning lever – Fig. 25.
– Attach insulation on top and sides, see Fig. 26 – 29.
Fig. 25 Remove cut-out, for LogWIN Klassik
pellet ready only
Fig. 26 Installing insulation
(LogWIN Klassik pellet ready)
Fig. 27 Installing insulation
(LogWIN Klassik pellet ready)
Fig. 28 Installing insulation
(LogWIN Klassik)
Fig. 29 Installing insulation
LogWIN Klassik:LogWIN Klassik pellet ready: