Rugged Windows Tablet M101B/ M101BL User Guide
Perform the following to connect the Tablet computer to AC Power:
1. On the side of the Tablet computer, lift the I/O protective cover by pulling on the latch
2. Plug the DC cord of the AC adapter into the Power Jack of the tablet computer.
3. Plug the AC power cord into the AC adapter.
4. Finally, Plug the AC power cord into the electrical outlet.
When the AC Adapter is connected, the battery pack starts charging. The battery LED indicator on
the tablet computer would show different states. Please refer to description of LED indicator on
Description of Parts.
High Capacity Battery (BL101)
High Capacity Battery (BL101)