This section provides user battery Information.
Main Battery:
The main battery icon displays the battery level in percentages
(0 to 100%).
Backup Battery: (For M101B)
The backup battery used for battery hot swapping displays its
state in text with the following meanings.
Battery Charge Time:
The Battery Information also displays estimated time needed to
fully charge the main battery when AC adapter is plugged in.
Meanwhile, the backup battery is charged by the main battery.
The function key mapping menu option allows user to change the
physical function buttons, Fn1 and Fn2. Users can change what
application will be launched with short press or long press of keys.
To configure function key mapping, perform the following:
1. Open the Hottab utility by press the (Menu) Button located
on the front panel, OR launching the Hottab Utility application.
2. Tap on the Setting button.
3. Tap on function key icon for the corresponding key that you want
to change.
4. At top of utility, it will say “Short Press” or “Long Press” to
indicate what type of press is being configured
5. You can switch what type of press you want to configure by
tapping on the “Short Press” or “Long Press” icon at the bottom
of the utility window.
6. Pick from list of preset applications by tapping on the application
icons OR customize which application to execute using the
picker.
Using the Custom picker:
1. Tap the icon to reveal browser window
2. Navigate to the desired executable to map to function key
3. Tap on “Done” to save selection.
To map the function key to another application:
1. Tap on the icon to remove connection to the original
application, and pick again tapping on icon.
Using the physical function keys:
1. While operating the tablet, click on the physical function keys to
activate functions mapped via the setup in this section.
To Next Page
Loading...
