WMF 1400 - Ready to Operate and Information

20
User Manual WMF 1400
Software
3.2 Ready to operate
3.2.1 Warm rinsing
Touching starts rinsing of the pipes with hot
water. The water warms the brewing system after an
extended idle period, and guarantees an optimum coffee
temperature.
3.2.1 Barista pad
Touching the pad alters the strength of the coffee
once for the next brew.
3.2.3 Information
Touching pad on the ready to operate display accesses
the Information menu.
The main “Information” menu contains the following
selection options:
Service
• Service
Commissioning data•
Next maintenance date•
Software version•
Care
Journal •
Logs of the most recent cleaning operation
Information about cleaning •
Information about last cleaning
Information about descaling •
Information about last/next descaling
Information about the scale filter (optional) •
Information about the remaining capacity
Brew time
Brew time of last beverage dispensed•
Recommended after a 30 min.
brewing pause, especially before
dispensing a cup of espresso.
Warm rinse pad (active/inactive)
see Settings
> Operating options
Software Chapter
weaker (-15 %)
normal, as per setting
stronger (+15 %)
Barista pad (active/inactive)
see Settings
> Operating options
Software Chapter