WMF 1400 - Chapter 4 Other settings; Mechanical Settings

38
User Manual WMF 1400
Other settings
Chapter 4 Other settings
4.1 Mechanical settings
4.1.1 Set grinding degree
 Remove product hoppers
Preset grind level is now visible.
Start the coffee dispensing cycle, and wait until the 
grinder starts
With grinder running, alter grinding degree as desired 
on the side of the machine using the multitool
Grind level 1 = fine (turn clockwise)
Grind level 6 = coarse (turn counter-clockwise)
Bruising or crushing hazard.
Never reach into the grinder mechanism when the coffee
machine is running and the product hopper removed.
4.1.2 Aquaflex (optional)
Switching between the constant water
supply and the water tank
Turn the position screw behind the water tank to the
desired position using the multitool. The sticker provides a
reference.
Arrow pointing left = Water tank
Arrow pointing right = Constant water supply
CAUTION
Bruising or
crushing hazard.
Never reach into the
grinder mechanism
with coffee machine
running and product
hopper removed.
See
Messages in
chapter 8