WMF 1400 - Timer Status; Set Timer

23
User Manual WMF 1400
Software
Timer status
 Touch
Activate/deactivate timer.
Set timer
 Touch
To program the switch on and switch off times.
Touch 
The run time display appears. Here the day, time and
desired operation are set.
Set day (Day). 
1 = Monday •
2 = Tuesday, etc. up to 7 = Sunday •
1-5 = Monday to Friday (Weekdays) •
1-7 = Entire week (Monday to Sunday)•
Set the time: (hours, minutes) 
Set the desired switching time (action) 
Switch on time • =
I
(on display)
Switch off time • =
O
(on display)
Confirm with 
Display programmed switching times:
Touch 
Prg
Programmed switch times are displayed here.
Up to 16 switch times per day can be set.
Programmed times are listed chronologically.
Any new switch time is sorted chronologically immediately
upon input and confirmation with
.
Touching  leads directly to the timer overview
When the timer is activated,
the timer symbol, a little clock,
appears on the display.
Example
For day 1-5 or day 1-7, the
switching times are copied to the
indicated days.
Adjust settings with the
+
and
-
pads.
Current selection is inversely
displayed.