Safety & General Information
Keep Safety Labels In Good Condition
Safety & General Information doc041620 1-9
1
Keep Safety Labels In Good Condition
IMPORTANT! Always be sure that all safety decals are clean and
readable. Replace all damaged safety decals to prevent personal
injury or damage to the equipment. Contact your local distributor,
or call Wood-Mizer Customer Service to order more decals.
IMPORTANT! When replacing a component having a safety decal
affixed to it, make sure the new component also has the safety decal
affixed.
See Table 1-1. See the table below for descriptions of the pictographic warning and informational
decals placed on the LX450 sawmill.
TABLE 1-1
Decal View Decal No. Description
096317 CAUTION! Read thoroughly the operator’s
manual before operating the sawmill.
Observe all safety instructions and rules
when operating the machine.
099220 CAUTION! Close all guards and covers
before starting the machine.
To Next Page
Loading...
