Setup & Operation
Starting the Motor
2
2-14 15doc041620 Setup & Operation
4. Adjust the blade tension if necessary to compensate for any changes that may have occurred while
adjusting the cant control.
5. Close the blade housing cover.
DANGER! Make sure all guards and covers are in place and
secured before operating the sawmill. Failure to do so may result in
serious injury.
IMPORTANT! After aligning the blade on the wheels, always double-check the blade guide
spacing and location. (See SECTION 5
for more information.)
2.6 Starting the Motor
See the motor manufacturer’s manual supplied with your sawmill for detailed starting and operating
instructions.
IMPORTANT! When starting the machine for the first time, check
that main motor rotation direction is as indicated by the arrow located
on the motor body. If the rotation direction is incorrect, invert the
phases in the phase inverter in the power socket. Setting the phases
in the phase inverter correctly will ensure correct rotation directions
of all sawmill motors (sawmills with electric motors).
DANGER! Make sure all guards and covers are in place and
secured before operating the sawmill. Failure to do so may result in
serious injury.
DANGER! Always be sure the blade is disengaged and all persons
are out of the path of the blade before starting the motor. Failure to
do so may result in serious injury.
WARNING! Always wear eye, ear, respiration, and foot protection as
well as safety clothing when operating or servicing the machine.
Failure to do so may result in serious injury.
To Next Page
Loading...
