Rear Swing Arm
A
Side clearance（opening swing arm end） limit value：1.0mm
B
Tightening torque of Nut 1 in the diagram is：70-83 N·m
1 Locking nut M14X1.5 2 Dust ring assembly 3 Bush 4 Oil seal 5 Middle sleeve 6 Rubber gasket for
protecting plate 7 Rear swing arm welding assembly 8 Washer φ12 9 Chain adjuster spacer 10
Connecting rod assembly 11 Bolt 12 Washer 13 Nut M8 14 Cotter pin 2×18 15 Chain protector 16
Rear swing arm bush 17 Rear swing arm assembly
To Next Page
Loading...