Inspection/Adjustment
Preparatory standard Compression pressure of cylinder
Periodic maintenance schedule Engine oil
Engine oil/filter Replacement of engine oil
Steering stem bearing and handle fixation Drive chain slackness
Throttle cable adjustment Front/rear brake clearance
Air cleaner Headlamp
Spark plug Clutch
Battery Front/rear suspension system
Carburetor Bolt/nut/fastening part
Ignition timing Tyre specification
Wheel rim/tyre
Preparatory Standard
General
Warning！
• Before running the engine, please make sure the area you are working in is well ventilated. You shall never
run the engine in an enclosed site. Gas exhausted from the motorcycle contains carbon monoxide, which may
lead to loss of consciousness and result in death
• Under certain conditions, gasoline is highly volatile. Work in well-ventilated site. Fire and smoking are
forbidden in working site or gasoline storage place.
To Next Page
Loading...
Need help?
General