Bent gearshift spindle Warped clutch plate
Injured gearshift cam Faulty clutch push rod
Bent or injured gearshift plate Abnormal engine oil and oil level
14.3 Clutch
14.3.1 Removal
Screw off the four bolts for separating plate in criss-cross mode.
Remove release lever, sleeve, bearing, separating plate and clutch
spring.
Removed components refer to exploded view.
Use a special tool to screw off clutch locknut.
Remove locknut and washer.
Remove clutch center bracket.
Remove clutch drive and driven friction plates.
Remove clutch pressure plate.
Removed components refer to exploded view.
Remove spline washer.
Remove housing assembly.
Install clutch in the reverse order of removal.
Four-pawl bush
wrench
Universal fixer
Housing assembly
To Next Page
Loading...