Check wheel bearing. If there is bearing clearance in the wheel hub or rotation of the wheel is unbalanced, replace it
with a new one.
Check oil seal. If it is worn or broken, replace it with a new one.
8.5.4. Installation
Install it in the reverse order of removal.
Install drive chain, chain cover, rear left shock absorber, rear wheel and drive sprocket cover.
Adjust slackness of drive chain and clearance of brake pedal.
If slackness of drive chain is too small, engine and other important components will work overload.
Keep the slackness of drive chain in specified limit range.
To Next Page
Loading...