Managing the Printer
Xerox
®
B205 Multifunction Printer
User Guide
181
Updating the Software
1. At your computer, open a Web browser. In the address field, type the IP address of the printer,
then press Enter or Return.
2. Select Properties.
3. Select Maintenance.
4. Select Upgrade Management.
Note: If prompted to enter a user name and password, for information about logging in as an
administrator, refer to Accessing the Xerox® CentreWare® Internet Services Administrator
Account.
5. Select the Upgrades enable check box.
6. Select Firmware Upgrade.
7. Select Browse or Choose File. Locate and select the software upgrade .hd file obtained earlier,
then select Open.
8. Select Install Software.
The firmware will now be verified and display information about processing the upgrade file.
9. Select OK.
The upgrade should take less than 10 minutes unless there are network issues.
Once the printer has completed the upgrade it will reboot automatically. The configuration report will
print (if enabled). Check the configuration report to verify that the software level has changed.
To Next Page
Loading...
