Xerox B205

Setting Up the Services
Xerox
®
B205 Multifunction Printer
User Guide
87
Copy Settings
If your printer is connected to your computer through a wired or wireless network connection, use
Xerox
®
CentreWare
®
Internet Services to configure the settings.
If your printer is connected to your computer using a USB cable connection, configure settings at the
device or using Xerox Easy Printer Manager.
Configuring Copy Settings Using Xerox
®
CentreWare
®
Internet Services
Changing the Default Copy Settings
The printer uses the default copy settings on all copy jobs unless you change them for an individual
job. You can modify the default copy settings.
1. In Xerox
®
CentreWare
®
Internet Services, click Properties  Services.
2. Click Copy.
3. For Defaults, click the Pencil icon.
4. Select the appropriate tab:
• To modify copy settings, select the Copy Settings tab.
• To modify the input settings, select the Input Settings tab.
• To modify the output settings, select the Output Settings tab.
5. In the Default column, click Edit.
6. Modify the settings as needed.
7. Click Save.
8. Click Close.