General Setup
Xerox
®
B205 Multifunction Printer
User Guide
50
General Setup
General Setup Using the Printer Control Panel
Machine Setup
1. To access the System Menus, press the Machine Status button on the control panel.
2. Press the Up/Down arrows to select System Setup and press OK.
3. Press the Up/Down arrows to select Machine Setup and press OK.
The following Machine Setup options and settings are available:
Option Description Settings
Language Use this option to set the message
display language.
•English
• List of Available Languages
Power Saver Timers Use this option to set the time the
printer waits before entering Low Power
Save or Very Low Power Save. Enter
between 0 - 119 minutes.
•Low Power Save
•Very Low Power Save
Wakeup Event Use this option to enable the printer to
wake-up when a job is received or a
button is pressed.
•On
•Off
System Timeout Sets the elapsed time before the printer
reverts to default settings.
•On
•Off
Config. Page Enables a report detailing all the
settings to be printed.
•On
•Off
Altitude Adj. Atmospheric pressure, determined by
altitude, can affect print quality. If the
printer is at an elevation greater than
1000 m (3280 ft.), to improve print
quality, you can use Altitude
Adjustment.
• Normal: Below 1000 m (3280 ft.)
• High 1: 1000–2000 m (3280–6561
ft)
• High 2: 2000–3000 m (6561–9842
ft)
• High 3: 3000–4000 m (9842–13123
ft)
• High 4: 4000–5000 m (13,123 –
16,404 ft).
Auto Continue Determines whether or not the printer
continues printing when it detects the
paper does not match the paper
settings.
•After 30 Sec
•Off
•After 0 Sec
To Next Page
Loading...
Need help?
General
Weight and Dimensions
