Installing Printer Software
Xerox
®
B205 Multifunction Printer
User Guide
79
If your printer is connected to the computer, a Tes t Print page will be printed. If the Te s t Print operation
is successful, refer to the Printing chapter of this guide. If the print operation failed, refer to the
Troubleshooting chapter of this guide.
Installing Drivers and Connecting to a Networked Printer
When you connect your printer to a network, you must first configure the TCP/IP settings for the
printer. After you have assigned and verified the TCP/IP settings, you are ready to install the software
on each computer on the network.
1. Make sure that the printer is connected to your computer and powered on.
2. Insert the Software and Documentation disc into the appropriate drive on your computer. The
installer starts automatically.
If the installer does not start automatically, navigate to the drive, then double-click the Setup.exe
installer file.
3. Select Yes in the User Account Control window.
4. Select Install Software. A Printer Connection Type window displays.
5. Select Network connection, then select Next.
6. Select the software to install, or select a setup type using the menu:
• Recommended: This is the default install type and is recommended for most users. All
components necessary for printer operations are installed.
• Minimum: With this option, only the drivers are installed.
• Custom: If you select Custom, you can choose individual components to install.
Note: When you select an option, a description of that option displays at the bottom of the
screen.
7. Select Advanced Options if you would like to do any of the following:
• Change the printer name
• Change the default printer
• Share the printer with other users on the network
• Change the destination path where driver files and user guide files will be copied to. Select
Browse to change the path.
8. Select Next and follow the wizard instruction to select and install the printer.
9. Select OK to continue, then select Next. The Copying Files window displays, and then the
Installing Software window.
10. After the installation is finished, the Setup Completed window displays.
11. Select Print a test page and select Finish.
If you have successfully connected to the printer on the network, a Te st Print page prints. If the Te s t
Print operation is successful, refer to the Printing chapter of this guide. If the print operation failed,
refer to the Troubleshooting chapter of this guide.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
