Xerox DocuMate 4799 - Scanner Setup; Unpack the Scanner

Xerox
®
DocuMate
®
4799
User’s Guide
3-9
3
Scanner Setup
Unpack the Scanner
Use care when unpacking, moving and assembling the scanner. Follow these instructions to prevent injury and
damage to the scanner.
1. Remove the scanner from the shipping box, verify all parts listed on page 5 are in the box.
We recommend that you keep the original packing materials in case you need them later.
2. Always have at least two people carry the scanner, lifting the scanner up from
underneath.
3. Use a desk or table that can support the weight of the scanner, do not place the
scanner on a cloth covered surface.
4. Place the scanner on a level surface near the computer.
Keep at least 15 inches of space on every side of the scanner for the input and exit
tray extensions, performing maintenance, and to have sufficient air flow for
ventilation.
5. Remove all shipping tape from the top and side of the scanner.