Scanning and Configuring One Touch
Xerox
®
DocuMate
®
4799
User’s Guide
6-76
Image Editors
Image editors include Microsoft Paint and other drawing and graphics applications.
Supported file formats—the available file formats are based on the selected destination application. For
example, you can scan to Microsoft’s Paint application as a BMP, GIF, PNG, or JPG, but not as TIFF or JP2 as Paint
cannot open those two file types. Please refer to Image Formats on page 44 for more information on which
image formats One Touch supports.
Destination type—this destination type is classified as a “Simple Image Link”. To make it available in the
destination list, you must select Image editors (i.e. Paint) on the Options tab in the One Touch Properties window.
If the image editing application you are using does not appear in the Select destination list, you can add the
application using the Image Documents One Touch Link Properties window.
1. In the One Touch Properties window select one of the default image editors such as Microsoft Paint.
2. Click on the Properties button to open the Image Documents One Touch Link Properties window.
From this window you can add an application and set additional document handling options.
Note that if you recently installed an application, click the Refresh button to see if One Touch will
automatically configure the link before you try adding it manually.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
