Xerox DocuMate 4799 - Clearing Paper Jams; Troubleshooting

Scanner Options, Maintenance and Troubleshooting
Xerox
®
DocuMate
®
4790
User’s Guide
9-162
3. Insert the pins on the right side of the imprinter unit into the holes on the scanner. Angle the imprinter down
into the scanner until the pins on the left side line up with the slots in the scanner. Gently press down on the
imprinter unit until it clicks in place.
4. Connect the cable to the connection port in the scanner.
5. Close the pre-imprinter door when you are finished.
Installing a Post-Imprinter
1. Turn off the scanner.
2. Open the post-imprinter door.
3. Connect the cable to the port in the scanner.
Be sure to properly align the rib on the connector with the slot in the connection port.