Xerox DocuMate 4799 User Manual

Scanner Options, Maintenance and Troubleshooting
Xerox
®
DocuMate
®
4790
User’s Guide
9-161
Installing an Imprinter
An imprinter unit will print text, such as a date and time stamp, on the pages as they are scanned. If you have a
pre-imprinter unit installed, the text is printed on the face-up side of the page before the image is captured, and
the printed text is then reflected in the scanned image. If you have a post-imprinter installed, the text is printed
on the back side of the page, after the page has been scanned, so that the text is not in the final image.
The imprinter unit is an optional accessory that you can purchase at www.xeroxscanners.com in the Parts and
Accessories page for your scanner.
Installing a Pre-Imprinter
1. Turn off the scanner.
2. Open the pre-imprinter door.

Xerox DocuMate 4799 Specifications

General

Film scanning	No
Color scanning	Yes
Duplex scanning	-
Input color depth	24 bit
Maximum scan size	297 x 432 mm
ADF scan speed (b/w, A4)	100 ppm
Enhanced scan resolution	300 x 300 DPI
Optical scanning resolution	600 x 600 DPI
Scanner type	Flatbed & ADF scanner
Product color	Blue, White
Sensor type	CCD
Daily duty cycle (max)	40000 pages
Auto document feeder (ADF) input capacity	250 sheets
Minimum scan area (ADF)	48 x 70 mm
ISO A-series sizes (A0...A9)	A3, A4
Maximum ISO A-series paper size	A3
Auto Document Feeder (ADF) media weight	75 - 80 g/m²
USB version	2.0
Standard interfaces	USB 2.0
Minimum RAM	2048 MB
Minimum processor	Intel® Pentium® 4
Minimum storage drive space	350 MB
Minimum system requirements	CD/DVD-ROM
Compatible operating systems	Windows 7 Windows Vista Windows XP
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth	585 mm
Width	474 mm
Height	329 mm
Weight	25000 g