Installing the Scan Driver
7-4
Installing the Scan Driver (Macintosh)
To install the Scan driver from the Software Pack CD-ROM:
1. Start Macintosh.
2. Insert the CD-ROM into the CD-ROM drive.
3. Open MacOSX 10.3-10.5 folder.
4. Double-click C1190 FS Scan Installer.
5. The installer starts and the Authenticate window opens.
6. Enter the Administrator’s user name and password, then click OK.
7. Read through the license agreement carefully and if you have no objections to it, click Continue.
8. Click Agree.
9. Confirm the Install Type. Click Install.
10. When the dialog box showing installation has completed appears, click Quit.
This completes the installation.
To Next Page
Loading...
Need help?
General
